Cisco CCIT is a very popular exam in Cisco certification.
The latest update shares the Cisco CCIT 100-490 exam dumps and online practice test questions to help you pass the exam successfully.
If you are a novice, you should first go to the official Cisco platform to learn about the latest 100-490 Supporting Cisco Routing & Switching Network Devices exam basic information
(Exam overview, Exam preparation, Schedule an exam, Frequently asked questions). Knowing this information will help you do a good job ahead of time. Preparation.
Of course, the easiest way is to practice exams and get a complete Cisco 100-490 dumps: https://www.leads4pass.com/100-490.html (60 Q&A).
[2022 Updated] latest CCT Routing & Switching 100-490 dumps exam material
Question 1:
Which protocol does TFTP typically use for transport?
A. RSVP
B. TCP
C. HTTP
D. UDP
Question 2:
What are the two components of a WAN connection? (Choose two.)
A. CSU/DSU
B. router
C. bridge
D. hub
E. switch
Question 3:
Which device is a DTE device?
A. CSU/DSU
B. router
C. cable modem
D. DSL modem
Question 4:
Which layer of the OSI model defines how data is formatted for transmission and how access to the physical media is controlled?
A. presentation
B. data link
C. network
D. transport
Question 5:
Which type of physical connector does a Gigabit Ethernet port typically use?
A. RJ-9
B. RJ-45
C. DB-25
D. RJ-11
[2022 Updated] Click here to verify the answers to the above exam questions and get more latest updates on CCT Routing & Switching 100-490 dumps of exam material
Cisco 100-490 exam practice
The answer is obtained at the end of the article
QUESTION 1
Which two ports on a laptop are used to gain console access to a Cisco switch? (Choose two.)
A. DB-9
B. USB
C. DVI
D. RJ-11
E. RJ-45 Ethernet
QUESTION 2
An Ethernet interface is up and the line protocol is down. What are two possible causes? (Choose two.)
A. There is a speed or duplex mismatch with the remote device.
B. There is a Layer 2 mismatch in the encapsulation type.
C. The Ethernet interface has been manually disabled.
D. Keepalives are not being received by the local device.
E. The Ethernet cable might not be attached properly.
QUESTION 3
What are two components of a WAN connection? (Choose two.)
A. CSU/DSU
B. router
C. bridge
D. hub
E. switch
QUESTION 4
What is the correct IPv6 address notation?
A. 2001:0DB8::/128
B. 2001:0DB8:0::
C. 2001:0DB8::1:1:1:1:1
D. 2001:0DB8:130F:0000:0000:7000:0000:140B
QUESTION 5
Cisco NX-OS has added the ability to use which type of custom scripting to help manage user networks?
A. C++
B. Collective
C. SQL
D. Python
QUESTION 6
What is the primary method for recovering or upgrading a Cisco network device system image?
A. USB storage
B. FTP
C. the tftpdnld command
D. the xmodem command
QUESTION 7
Which two commands are valid for copying a saved configuration to RAM? (Choose two.)
A. copy startup-config running-config
B. copy running-config startup-config
C. copy tftp running-config
D. copy running-config tftp
E. copy tftp startup-config
QUESTION 8
Which Cisco CPAK 100GBASE module supports Multimode Fiber cable?
A. Cisco CPAK-100G-CWDM4
B. Cisco CPAK-100G-LR4
C. Cisco CPAK-100G-ER4L
D. Cisco CPAK-100G-SR4
QUESTION 9
Which type of Cisco console cable is used to connect a laptop to the console port on a Cisco router?
A. straight-through
B. fiber
C. crossover
D. rollover
QUESTION 10
Which two statements about a SmartJack are true? (Choose two.)
A. It provides signal conversion.
B. It acts as a concentration point for dial-in and dial-out connections.
C. It operates at Layer 2 of the OSI model.
D. It provides channel testing.
E. It regenerates the signal to compensate for signal degradation from line transmission.
QUESTION 11
Which bits represent the boot field in the configuration register value?
A. highest two bits
B. lowest two bits
C. highest four bits
D. lowest four bits
QUESTION 12
Which command sends an echo request packet to the target host and then waits for an echo response message?
A. echo
B. access
C. ping
D. connect
QUESTION 13
What are two purposes of a USB thumb drive? (Choose two.)
A. to save the system log
B. to copy configuration files to and from a PC
C. to save router hardware information
D. to copy IOS images to and from a PC
E. to increase system memory size
QUESTION 14
Which command displays a list of file systems that are available on Cisco devices?
A. show memory
B. show directory
C. show file system
D. show version
QUESTION 15
Which type of transceiver module is used for 40 Gigabit Ethernet connectivity?
A. SFP+
B. GBIC
C. QSFP+
D. XFP
Reference: https://www.cisco.com/c/en/us/products/interfaces-modules/40-gigabit-modules/index.html#:~:text=The%20
Cisco%20QSFP%20BiDi%20transceiver,10%20Gigabit%20Ethernet%20fiber%20infrastructure
Verification place
| Q1 | Q2 | Q3 | Q4 | Q5 | Q6 | Q7 | Q8 | Q9 | Q10 | Q11 | Q12 | Q13 | Q14 | Q15 |
| AB | AB | AB | D | D | C | AC | D | D | AE | D | C | BD | C | C |
PS. Cisco 100-490 exam PDF
Google Drive: https://drive.google.com/file/d/1tqpAwty7fhVlbBDQcaLzfiTRQb-r1JGY/view?usp=sharing
Cisco is a very popular certification exam! And it’s not cheap and easy!
All being able to successfully pass the exam for the first time can help everyone save a lot of money!
Get the latest update to ensure a true and effective Cisco 100-490 dumps https://www.leads4pass.com/100-490.html (60 Q&A). This is very necessary.
Thanks for reading!
Like to help share!
Thanks!