For all 300-425 ENWLSD (Designing Cisco Enterprise Wireless Networks) exam candidates: Updated 300-425 dumps to help you pass one of the CCNP Enterprise Concentration exams.
Lead4Pass 300-425 Dumps provides 120 exam practice questions and answers, with PDF files and VCE study engine for the most popular study tool of the moment to help you prepare for the 300-425 ENWLSD exam practice anytime, anywhere.
Therefore, with the help of the Lead4Pass 300-425 dumps, candidates are able to prepare for the 300-425 ENWLSD exam and finally pass the exam in the shortest possible time.
Preparing for the 300-425 ENWLSD Exam:
Download the Lead4Pass 300-425 dumps https://www.leads4pass.com/300-425.html, then practice all the questions, then you need to spend $300 to take the test and choose English or Japanese by region to prepare for the test because this test Only Both languages are supported and in the end, you will be notified of your success.
Try some of the online practice 300-425 dumps exam questions first:
Share the final answer at the end of the article
QUESTION 1:
A wireless engineer is using Ekahau site survey to validate that an existing wireless network is operating as expected, which type of survey should be used to identify the end-to-end network performance?
A. GPS assisted
B. Spectrum analysis
C. Passive
D. Active ping
QUESTION 2:
A customer called with a requirement that internal clients must be on different subnets depending on the building they are in. All access points are operating in local mode and will not be modified, and this is a single controller solution.
Which design approach creates the desired result?
A. Create AP groups for each desired location, map the correct VLANs to the internal SSID, and add the access points for that location.
B. Create an SSID place it to the desired VLAN under WLANs and configure 802.1x in ISE to assign the correct VLAN based on the SSID from which the client is authenticating
C. Create FlexConnect groups, place the access points in, and set the correct VLAN to SSID mapping based on location.
D. Create mobility anchors for the SSID and on the controller under the internal SSID create a foreign map to the desired VLAN based on location.
QUESTION 3:
A customer has two Cisco 550B WLCs that manage all the access points in their network and provide N+1 redundancy and load balancing. The primary Cisco WLC has 60 licenses and the secondary Cisco WLC has 40. The customer wants to convert the N+1 model to an HA model and provide SSO. Configuration must be performed during a maintenance window. After performing all the configurations on both controllers, the config redundancy unit secondary command is issued on the secondary Cisco WLC and it fails.
Which parameter needs to be in place to complete the configuration?
A. A cable in the RP port
B. The secondary Cisco WLC needs a minimum of 50 base licenses
C. The primary Cisco WLC is already set as the secondary unit.
D. SSO needs to be enabled
QUESTION 4:
An engineer is designing a wireless deployment for a university auditorium. Which two features can be used to help deal with the issues introduced by high AP count? (Choose two.)
A. TSPEC
B. RXSOP
C. TPC
D. LSS
E. DFS
QUESTION 5:
An engineer must repurpose a lab WLC appliance for use in the production environment of the enterprise. After the new WLC is configured with the information of the other WLC, the mobility tunnels are still not coming up. What is the reason?
A. A firewall is blocking UDP port 16667 between the WLCs.
B. The WLC management interfaces are in the same VLAN.
C. The hardware platform is incompatible.
D. The mobility groups are different.
QUESTION 6:
Multiple WLCs are implemented in a high-availability configuration in a mobility group. APS is deployed with only a primary controller assigned. By default, which mobility group member controller do the orphaned APs join in the event of a failed controller?
A. controller with the most available AP free license capacity
B. controller with the lowest percent of associated APs per license capacity
C. controller with the least CPU utilization over the last reporting period
D. controller with the least number of associated APs
QUESTION 7:
A customer has multiple WLCs running N+1 redundancy with APs equally distributed. Only one WLC is a designated backup for all other WLCs so the customer must ensure that the most critical APs remain registered or get priority over other APs in case of a WLC failure. However, the customer notices on WLC failure that some critical APs remain unregistered What needs to be addressed in the design?
A. AP fallback is not enabled on the backup WLC.
B. AP failover priority is not enabled globally on the backup WLC.
C. AP failover priority is not enabled globally on the failed WLC.
D. AP fallback is not enabled on the failed WLC.
QUESTION 8:
A customer has restricted the AP and antenna combinations for a design to be limited to one model integrated antenna AP for carpeted spaces and one model external antenna AP with high gain antennas for industrial, maintenance, or storage areas. When moving between a carpeted area to an industrial area, the engineer forgets to change survey devices and surveys several APs. Which strategy will reduce the negative impact of the design?
A. Resurvey and adjust the design.
B. Deploy unsurveyed access points to the design.
C. Deploy the specified access points per area type.
D. Increase the Tx power on incorrectly surveyed access points.
QUESTION 9:
Refer to the exhibit.
A WLC SSO pair is set up. Which failure scenario causes a split-brain scenario?
A. RP is down.
B. Two distribution ports on the active WLC are down.
C. VSL is down.
D. One distribution port on the active WLC is down.
QUESTION 10:
A high-density wireless network is designed. Which Cisco WLC configuration setting must be incorporated in the design to encourage clients to use the 5 GHz spectrum?
A. RRM
B. Cisco centralized key management
C. Band select
D. Load balancing
QUESTION 11:
An engineer is designing a wireless network to support Cisco Hyperlocation. The customer indicated some locations that require high density. How is the design adjusted?
A. Add additional APs to all the comers of the site.
B. Add more APs than indicated from the site survey spread across all areas.
C. Add an additional AP in the middle of the dense area.
D. Run the site survey using -57dBm as a threshold.
QUESTION 12:
An engineer must perform a pre-deployment site survey for a new building in a high-security are
A. The design must provide a primary signal RSSI of-65 dBm for the clients. Which two requirements complete This design? (Choose two)
B. Site access
C. AP model
D. WLC model
E. HAVC access
F. Number of clients
QUESTION 13:
An engineer changed the TPC Power Threshold for and wireless deployment from the default value to-65 dBm. The engineer conducts a new post-deployment Survey to validate the results What is the expected outcome?
A. Increase cell size
B. Decreased client signal strength
C. Increased received sensitivity
D. Decreased channel overlap
……
Verify answer:
| Number: | Q1 | Q2 | Q3 | Q4 | Q5 | Q6 | Q7 | Q8 | Q9 | Q10 | Q11 | Q12 | Q13 |
| Answers: | B | A | B | CE | D | D | C | A | C | C | D | BE | B |
[Google Drive] Download the above 300-425 dumps exam questions: https://drive.google.com/file/d/1iq_lBt-u8PIq5ie8YPsRs4L9AftMII4O/
Click here to study the complete 300-425 Dumps exam questions for passing the 300-425 ENWLSD exam preparation. Good luck!