[2017 PDF free download] Lead4pass Free Latest Cisco 300-135 Dumps PDF Questions And Answers, The Best 300-135 Dumps Exam Study Guide And Youtube

The latest Cisco CCNP Routing and Switching 300-135 dumps exam is the industry leader in information technology, and getting certified by them is a guaranteed way to succeed with IT careers. http://www.leads4pass.com/300-135.html dumps pdf questions and answers. High quality Cisco CCNP Routing and Switching 300-135 dumps pdf training materials, download one of the many PDF readers that are available for free.

QUESTION 1
In computer networking a multicast address is an identifier for a group of hosts that have joined a multicast group. Multicast addressing can be used in the Link Layer (OSI Layer 2), such as Ethernet Multicast, as well as at the Internet Layer (OSI Layer 3) as IPv4 or IPv6 Multicast. Which two descriptions are correct regarding multicast addressing? ( choose two )
A. The first 23 bits of the multicast MAC address are 0x01-00-5E. This is a reserved value that indicates a multicast application.
B. The last 3 bytes (24 bits) of the multicast MAC address are 0x01-00-5E. This is a reserved value that indicates a multicast application.
C. To calculate the Layer 2 multicast address, the host maps the last 23 bits of the IP address into the last 24 bits of the MAC address. The high-order bit is set to 0.
D. The first 3 bytes (24 bits) of the multicast MAC address are 0x01-00-5E. This is a reserved value that indicates a multicast application.

 » Read more about: [2017 PDF free download] Lead4pass Free Latest Cisco 300-135 Dumps PDF Questions And Answers, The Best 300-135 Dumps Exam Study Guide And Youtube  »

[2017 PDF free download] The Best 200-155 Dumps PDF Materials And Youtube, Latest Cisco 200-155 Dumps Questions And Answers Free Update

High quality Cisco 200-155 exam pdf training material offers the latest real 200-155 dumps. 100% real and pass guarantee with latest 200-155 exam questions update online. http://www.leads4pass.com/200-155.html The best and most updated Cisco 200-155 dumps exam training materials, download one of the many PDF readers that are available for free.

QUESTION 1
The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command?
A. This command should be executed from the global configuration mode.
B. The IP address 10.121.16.8 is the local router port used to forward data.
C. 102 is the remote DLCI that will receive the information.
D. This command is required for all Frame Relay configurations.
E. The broadcast option allows packets, such as RIP updates, to be forwarded across the PVC.
Correct Answer: E

QUESTION 2
What are two drawbacks of implementing a link-state routing protocol? (Choose two.)
A. the sequencing and acknowledgment of link-state packets
B. the requirement for a hierarchical IP addressing scheme for optimal functionality
C. the high volume of link-state advertisements in a converged network
D. the high demand on router resources to run the link-state routing algorithm
E. the large size of the topology table listing all advertised routes in the converged network
Correct Answer: BD

QUESTION 3
Refer to the exhibit.

 » Read more about: [2017 PDF free download] The Best 200-155 Dumps PDF Materials And Youtube, Latest Cisco 200-155 Dumps Questions And Answers Free Update  »

[2017 PDF free download] Lead4pass Latest Cisco 210-250 Dumps Exam Questions And Answers, High Quality 210-250 Dumps Training Materials And Youtube

The latest 210-250 pdf practice questions and answers, pass Cisco 210-250 exams test easily. Get latest 210-250 exam dumps at best prices, try free demo. http://www.leads4pass.com/210-250.html Updated Cisco 210-250 exam questions and 210-250 dumps pdf training materials, download one of the many PDF readers that are available for free.

QUESTION 1
A cloud administrator for an enterprise organization must create and deploy a web application in the private cloud of the organization. The environment consists of two web servers: one application server and one database server. The application stack should be available only to Internet traffic while keeping the database and application server completely secure.
Which Cisco UCS Director component should the administrator use to simplify this task?
A. fenced application containers
B. vApp containers
C. VM containers
D. application containers
Answer: C

QUESTION 2
Which option lists the different container types available in Cisco UCS Director under Menu Bar > Solutions > VACS Container?
A. Cisco VACS 3 Tier (Internal), Cisco VACS 3 Tier (External), Cisco VACS Custom Container
B. Cisco VACS 3 Tier (Inbound), Cisco VACS 2 Tier (Outbound), Cisco VACS Dual Container
C. Cisco VACS 4 Tier (Internal), Cisco VACS 4 Tier (External), Cisco VACS Custom Container
D. Cisco VACS 4 Tier (Inbound), Cisco VACS 4 Tier (Outbound), Cisco VACS Dual Container
Answer: A

QUESTION 3                         210-250
A cloud administrator has deployed Cisco Prime Service Catalog. After deployment, which tool is used to build application models which are then deployed into Cisco Prime Service Catalog for consumption?

 » Read more about: [2017 PDF free download] Lead4pass Latest Cisco 210-250 Dumps Exam Questions And Answers, High Quality 210-250 Dumps Training Materials And Youtube  »

[2017 PDF free download] High Quality 300-175 Dumps PDF Questions And Answers At Lead4pass, Latest Cisco 300-175 Dumps Training Materials And Youtube

Pass the Cisco 300-175 exam test quickly and easily at first attempt with the latest Cisco 300-175 dumps exam practice questions PDF and practice exam, http://www.leads4pass.com/300-175.html download one of the many PDF readers that are available for free.

QUESTION 1
Which statement is true about the PPP Session Phase of PPPoE?
A. PPP options are negotiated and authentication is not performed. Once the link setup is completed, PPPoE functions as a Layer 3 encapsulation method that allows data to be transferred over the PPP link within PPPoE headers.
B. PPP options are not negotiated and authentication is performed. Once the link setup is completed, PPPoE functions as a Layer 4 encapsulation method that allows data to be transferred over the PPP link within PPPoE headers.
C. PPP options are automatically enabled and authorization is performed. Once the link setup is completed, PPPoE functions as a Layer 2 encapsulation method that allows data to be encrypted over the PPP link within PPPoE headers.
D. PPP options are negotiated and authentication is performed. Once the link setup is completed, PPPoE functions as a Layer 2 encapsulation method that allows data to be transferred over the PPP link within PPPoE headers.
Correct Answer: D

Explanation:
PPPoE is composed of two main phases:
Active Discovery Phase–In this phase, the PPPoE client locates a PPPoE server, called an access concentrator. During this phase, a Session ID is assigned and the PPPoE layer is established.

 » Read more about: [2017 PDF free download] High Quality 300-175 Dumps PDF Questions And Answers At Lead4pass, Latest Cisco 300-175 Dumps Training Materials And Youtube  »

[2017 PDF free download] Latest Cisco 300-206 Dumps Exam Study Guide, Best 300-206 Exam Practice Questions And Answers Free Download At Lead4pass

Practice test for Cisco 300-206 exam with real exam practice questions and answers. Pass your Implementing Cisco 300-206 exam Edge Network Security Solutions exam quickly and easily at first attempt.

QUESTION 1
You are the administrator of a multicontext transparent-mode Cisco ASA that uses a shared interface that belongs to more than one context. Because the same interface will be used within all three contexts, which statement describes how you will ensure that return traffic will reach the correct context?
A. Interfaces may not be shared between contexts in routed mode.
B. Configure a unique MAC address per context with the no mac-address auto command.
C. Configure a unique MAC address per context with the mac-address auto command.
D. Use static routes on the Cisco ASA to ensure that traffic reaches the correct context.
Correct Answer: C

QUESTION 2
Which three configurations are needed to enable SNMPv3 support on the Cisco ASA? (Choose three.)
A. SNMPv3 Local EngineID
B. SNMPv3 Remote EngineID
C. SNMP Users
D. SNMP Groups
E. SNMP Community Strings
F. SNMP Hosts
Correct Answer: CDF

QUESTION 3                                    300-206
Which two options are purposes of the packet-tracer command? (Choose two.)
A. to filter and monitor ingress traffic to a switch
B. to configure an interface-specific packet traceC. to simulate network traffic through a data path
D. to debug packet drops in a production network
E. to automatically correct an ACL entry in an ASA
Correct Answer: CD

QUESTION 4
For which purpose is the Cisco ASA CLI command aaa authentication match used?

 » Read more about: [2017 PDF free download] Latest Cisco 300-206 Dumps Exam Study Guide, Best 300-206 Exam Practice Questions And Answers Free Download At Lead4pass  »

[2017 PDF free download] Free Latest Cisco 200-355 Dumps Exam Practice Questions And Answers Download At Lead4pass With 100% Pass Guarantee

High quality Cisco CCNA Wireless 200-355 dumps exam training materials, the best Cisco 200-355 dumps exam practice questions and answers update online free try, 100% success and guarantee to pass 200-355 exam test quickly and easily at the first time.

Question No : 1
The network administrator receives complaints of slow wireless network performance and performs a sniffer trace of the wireless network in preparation for migration to 802.11n. The sample capture shows frames that contains AP beacons with NonERP_Present bit set to 1 and frames with RTS/CTS.
Which two conclusions can be interpreted from these frames? (Choose two.)
A. The network is performing slowly because 802.11n clients are already mixed with 802.11g clients.
B. The network is performing slowly because 802.11b clients still exist in the network.
C. The network is performing slowly because a wireless client is incorrectly configured, which results in RF interference.
D. Possible 802.11b wireless clients are located only in the AP cell radius where the sniffer capture was performed.
E. Possible 802.11b wireless clients could be located anywhere in the wireless network.
Answer: B,E

Question No : 2
When using the CLI command eping, configured for auto-anchor mobility wireless guest access, which type of packet is tested?

 » Read more about: [2017 PDF free download] Free Latest Cisco 200-355 Dumps Exam Practice Questions And Answers Download At Lead4pass With 100% Pass Guarantee  »

[2017 PDF free download] Update Free Latest Cisco 300-115 Exam Practice Materials At Lead4pass, High Quality 300-115 Exam Dumps Questions And Answers

Pass Cisco 300-115 exam in an easy way with real exam practice questions and answers. Free Cisco 300-115 exam test practice materials and study guides online demo download.

QUESTION 1
An access switch has been configured with an EtherChannel port. After configuring SPAN to monitor this port, the network administrator notices that not all traffic is being replicated to the management server. What is a cause for this issue?
A. VLAN filters are required to ensure traffic mirrors effectively.
B. SPAN encapsulation replication must be enabled to capture EtherChannel destination traffic.
C. The port channel can be used as a SPAN source, but not a destination.
D. RSPAN must be used to capture EtherChannel bidirectional traffic.
Correct Answer: C

Explanation:
A source port or EtherChannel is a port or EtherChannel monitored for traffic analysis. You can configure both Layer 2 and Layer 3 ports and EtherChannels as SPAN sources. SPAN can monitor one or more source ports or EtherChannels in a single SPAN session. You can configure ports or EtherChannels in any VLAN as SPAN sources. Trunk ports or EtherChannels can be configured as sources and mixed with nontrunk sources. A port-channel interface (an EtherChannel) can be a SPAN source, but not a destination.

QUESTION 2
Refer to the exhibit.

What is the result of the configuration?

 » Read more about: [2017 PDF free download] Update Free Latest Cisco 300-115 Exam Practice Materials At Lead4pass, High Quality 300-115 Exam Dumps Questions And Answers  »

[2017 PDF free download] Free Cisco 200-105 Exam PDF Practice Questions And Answers Download At Lead4pass With 100% Pass Guarantee

Cisco 200-105 exam test is the industry leader in information technology, and getting certified by them is a guaranteed way to succeed with IT careers. We help you do exactly http://www.leads4pass.com/200-105.html that with our high quality Cisco 200-105 ICND2 Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0) training materials.

Question No : 1
At which layer of the OSI model is RSTP used to prevent loops?
A. physical
B. data link
C. network
D. transport
Answer: B

Explanation:
RSTP and STP operate on switches and are based on the 200-105 exchange of Bridge Protocol Data Units (BPDUs) between switches. One of the most important fields in BPDUs is the Bridge Priority in which the MAC address is used to elect the Root Bridge, RSTP operates at Layer 2.

Question No : 2
Refer to the exhibit.

At the end of an RSTP election process, which access layer switch port will assume the discarding role?
A. Switch3, port fa0/1
B. Switch3, port fa0/12
C. Switch4, port fa0/11
D. Switch4, port fa0/2
E. Switch3, port Gi0/1
F. Switch3, port Gi0/2
Answer: C

Explanation:
In this question, we only care about the Access Layer switches (Switch3 & 4). Switch 3 has a lower bridge ID than Switch 4 (because the MAC of Switch3 is smaller than that of Switch4) so both ports of Switch3 will be in forwarding state. The alternative port will surely belong to Switch4.

 » Read more about: [2017 PDF free download] Free Cisco 200-105 Exam PDF Practice Questions And Answers Download At Lead4pass With 100% Pass Guarantee  »

[2017 PDF free download] Lead4pass Latest Cisco 100-105 Exam VCE Practice Questions And Answers, Free Download 100-105 PDF Study Materials With High Pass Rate

The latest Cisco 100-105 exam practice questions and answers covers all the knowledge points of the real exam. We update our product frequently so our customer can always have the http://www.leads4pass.com/100-105.html latest version of the brain dumps. We have the most professional expert team to back up our grate quality products. If you still cannot make your decision on purchasing our product, please try our free demo.

Question No : 1
Refer to the exhibit.

Mary is sending an instant message to Robert. The 100-105 message will be broken into a series of packets that will traverse all network devices. What addresses will populate these packets as they are forwarded from Router1 to Router2?

A. Option A
B. Option B
C. Option C
D. Option D
E. Option E
Answer: B

Explanation:
The Source and Destination IP address is not going to change. Host 1 IP address will stay as being the source IP and the Host 2 IP address will stay the destination IP address.
Those two are not going to change.
For the MAC address it is going to change each time it goes from one hope to another. (Except switches… they don’t change anything)
Frame leaving HOST 1 is going to have a source MAC of Host 1 and a destination MAC of Router 1.

 » Read more about: [2017 PDF free download] Lead4pass Latest Cisco 100-105 Exam VCE Practice Questions And Answers, Free Download 100-105 PDF Study Materials With High Pass Rate  »

[2017 PDF free download] Latest Cisco 210-060 Dumps Exam Study Guide, Best 210-060 Exam PDF Practice Questions And Answers Free Download At Lead4pass

Latest and most Accurate Cisco 210-060 exam study material and real exam practice questions and answers, Cisco CCNA Collaboration is the industry leader in information technology, http://www.leads4pass.com/210-060.html and getting certified by them is a guaranteed way to succeed with IT careers. We help you do exactly that with our high quality Cisco CCNA Collaboration Implementing Cisco Collaboration Devices (CICD) training materials.

QUESTION 1
An administrator group is looking to on-board multiple users with Cisco 210-060 Unified Communications Manager at one time. Which option should be used?
A. Bulk Administration Tool
B. Product Upgrade Tool
C. Command Lookup Tool
D. Cisco Unified Communications Manager User Options Page
E. Cisco Upload Tool
Correct Answer: A

QUESTION 2
A user wants their name to show on their phone instead of their directory number. Which configuration item allows an administrator to do this?
A. Line Text LabelB. Alerting Name
C. External Phone Number Mask
D. Caller Name
E. Description
Correct Answer: A

QUESTION 3
Use the router console to view the configuration and answer the question.

When a call is placed from the Branch Router phone to the PSTN number of 914085551212, the 210-060 call is failing. What dial-peer is supposed to be used and why is the call failing? Select 2 (two)
A. dial-peer voice 910 pots
B. dial-peer voice 9 pots
C. dial-peer voice 9001 voip
D. destination pattern is incorrect
E. prefix is missing from the dial-peer
F. the port assignment is incorrect in the dial-peer
G. the port number is missing in the dial-peer
Correct Answer: BF

QUESTION 4
A user would like all calls to be forwarded to voice mail. The user’s

 » Read more about: [2017 PDF free download] Latest Cisco 210-060 Dumps Exam Study Guide, Best 210-060 Exam PDF Practice Questions And Answers Free Download At Lead4pass  »

[2017 PDF free download] Free Download Cisco 300-101 Exam PDF Study Materials, Latest 300-101 Exam Questions And Answers

QUESTION 1
Which statement is true about the PPP Session Phase of PPPoE?
http://www.leads4pass.com/300-101.html Cisco Certification Exam Material 300-101 Exam Dumps

 Latest and most Accurate Cisco 300-101 exam material and real exam practice questions and answers.

A. PPP options are negotiated and authentication is not performed. Once the link setup is completed, PPPoE functions as a Layer 3 encapsulation method that allows data to be transferred over the PPP link within PPPoE headers.
B. PPP options are not negotiated and authentication is performed. Once the link setup is completed, PPPoE functions as a Layer 4 encapsulation method that allows data to be transferred over the PPP link within PPPoE headers.
C. PPP options are automatically enabled and authorization is performed. Once the link setup is completed, PPPoE functions as a Layer 2 encapsulation method that allows data to be encrypted over the PPP link within PPPoE headers.
D. PPP options are negotiated and authentication is performed. Once the link setup is completed, PPPoE functions as a Layer 2 encapsulation method that allows data to be transferred over the PPP link within PPPoE headers.
Correct Answer: D
Explanation:
PPPoE is composed of two main phases:
Active Discovery Phase–In this phase, the PPPoE client locates a PPPoE server, called an access concentrator. During this phase, a Session ID is assigned and the 300-101 PPPoE layer is established.

 » Read more about: [2017 PDF free download] Free Download Cisco 300-101 Exam PDF Study Materials, Latest 300-101 Exam Questions And Answers  »